manualshive.com logo in svg

Dell iDRAC7, User Manual

The Dell iDRAC7 User Manual is a comprehensive guide to efficiently manage your Dell server remotely. This manual is available for free download at manualshive.com, providing step-by-step instructions and troubleshooting tips for maximizing the potential of iDRAC7, ensuring seamless operations and improved productivity.

Share
Download
background image

9.

Click a Role Group to configure the control authorization policy for users under the standard schema mode.
The Active Directory Configuration and Management Step 4b of 4 page is displayed.

10. Specify the privileges and click Apply.

The settings are applied and the Active Directory Configuration and Management Step 4a of 4 page is displayed.

11. Click Finish. The Active Directory settings for standard schema is configured.

Configuring Active Directory With Standard Schema Using RACADM

To configure iDRAC7 Active Directory with Standard Schema using the RACADM:

1.

At the racadm command prompt, run the following commands:

– Using config command:

racadm config -g cfgActiveDirectory -o cfgADEnable 1

racadm config -g cfgActiveDirectory -o cfgADType 2

racadm config -g cfgStandardSchema -i <index> -o cfgSSADRoleGroupName 

<common name of the role group>

racadm config -g cfgStandardSchema -i <index> -o cfgSSADRoleGroupDomain 

<fully qualified domain name>

racadm config -g cfgStandardSchema -i <index> -o 

cfgSSADRoleGroupPrivilege <Bit Mask Value for specific RoleGroup 

permissions>

racadm config -g cfgActiveDirectory -o cfgADDomainController1 <fully 

qualified domain name or IP address of the domain controller>

racadm config -g cfgActiveDirectory -o cfgADDomainController2 <fully 

qualified domain name or IP address of the domain controller>

racadm config -g cfgActiveDirectory -o cfgADDomainController3 <fully 

qualified domain name or IP address of the domain controller>

racadm config -g cfgActiveDirectory -o cfgADGlobalCatalog1 <fully 

qualified domain name or IP address of the domain controller>

racadm config -g cfgActiveDirectory -o cfgADGlobalCatalog2 <fully 

qualified domain name or IP address of the domain controller>

racadm config -g cfgActiveDirectory -o cfgADGlobalCatalog3 <fully 

qualified domain name or IP address of the domain controller>

– Using set command:

racadm set iDRAC.ActiveDirectory.Enable 1

racadm set iDRAC.ActiveDirectory.Schema 2

racadm set iDRAC.ADGroup.Name <common name of the role group>

racadm set iDRAC.ADGroup.Domain <fully qualified domain name>

racadm set iDRAC.ADGroup.Privilege <Bit Mask Value for specific RoleGroup 

permissions>

racadm set iDRAC.ActiveDirectory.DomainController1 <fully qualified 

domain name or IP address of the domain controller>

racadm set iDRAC.ActiveDirectory.DomainController2 <fully qualified 

domain name or IP address of the domain controller>

racadm set iDRAC.ActiveDirectory.DomainController3 <fully qualified 

domain name or IP address of the domain controller>

racadm set iDRAC.ActiveDirectory.GlobalCatalog1 <fully qualified domain 

name or IP address of the domain controller>

racadm set iDRAC.ActiveDirectory.GlobalCatalog2 <fully qualified domain 

name or IP address of the domain controller>

racadm set iDRAC.ActiveDirectory.GlobalCatalog3 <fully qualified domain 

name or IP address of the domain controller>

For Bit Mask values for specific Role Group permissions, see 

Default Role Group Privileges

.

Enter the FQDN of the domain controller, not the FQDN of the domain. For example, enter 

servername.dell.com 

instead of 

dell.com

.

129

Summary of Contents for iDRAC7





























































































































































































































































Reviews:

No comments

Related manuals for iDRAC7

Eaton SC100 Operation Handbook preview
SC100
Brand: Eaton Pages: 86
Samsung SSA-P400 User Manual preview
SSA-P400
Brand: Samsung Pages: 27
KAESER KOMPRESSOREN SIGMA CONTROL 2 User Manual preview
SIGMA CONTROL 2
Brand: KAESER KOMPRESSOREN Pages: 246
Zener SMARTSTART 6000 Networking Manual preview
SMARTSTART 6000
Brand: Zener Pages: 36
Zapi SMART CONSOLE Instructions preview
SMART CONSOLE
Brand: Zapi Pages: 5
MOBA MOBA-Matic MMC-1000 User Manual preview
MOBA-Matic MMC-1000
Brand: MOBA Pages: 172
DMX4ALL DMX-LED-DIMMER X9 HR User Manual preview
DMX-LED-DIMMER X9 HR
Brand: DMX4ALL Pages: 14
Balboa Instruments GL8-GL8000M3-RCA-3.0 Tech Sheet preview
GL8-GL8000M3-RCA-3.0
Brand: Balboa Instruments Pages: 9
Oase StreamMax Pump Controller Operating Instructions Manual preview
StreamMax Pump Controller
Brand: Oase Pages: 142
DELTA DORE TYBOX 1010 WT User Manual preview
TYBOX 1010 WT
Brand: DELTA DORE Pages: 9
jbc KNE Instruction Manual preview
KNE
Brand: jbc Pages: 8
National Instruments GPIB PCI-GPIB Getting Started preview
GPIB PCI-GPIB
Brand: National Instruments Pages: 31
CASTLE THUNDERBIRD-36 User Manual preview
THUNDERBIRD-36
Brand: CASTLE Pages: 2
Samson TROVIS 5431 Mounting And Operating Instructions preview
TROVIS 5431
Brand: Samson Pages: 102
FCS FWC-1101 Installation Manual preview
FWC-1101
Brand: FCS Pages: 6
Pentair Goyen IS Series Products Installation Instructions preview
Goyen IS Series
Brand: Pentair Pages: 6
Matelec FPC-30020-CON Owner'S Operation Manual preview
FPC-30020-CON
Brand: Matelec Pages: 12
Sinclair XK64 User Manual preview
XK64
Brand: Sinclair Pages: 28

Brands by name

Popular brands

Load more brands