Dell iDRAC7 User Manual Download Page 186

Page: 186 / 252

Supported Drives and Devices

The following table lists the drives supported through virtual media.

Table 25. Supported Drives and Devices

Drive

Supported Storage Media

Virtual Optical Drives

•

Legacy 1.44 floppy drive with a 1.44 floppy diskette

•

CD-ROM

•

DVD

•

CD-RW

•

Combination drive with CD-ROM media

Virtual floppy drives

•

CD-ROM/DVD image file in the ISO9660 format

•

Floppy image file in the ISO9660 format

USB flash drives

•

USB CD-ROM drive with CD-ROM media

•

USB Key image in the ISO9660 format

Configuring Virtual Media

Before you configure the Virtual Media settings, make sure that you have configured your Web browser to use Java or
ActiveX plug-in.
Related Links

Configuring Web Browsers to Use Virtual Console

Configuring Virtual Media Using iDRAC7 Web Interface

To configure virtual media settings:

CAUTION: Do not reset iDRAC7 when running a Virtual Media session. Otherwise, undesirable results may occur,
including data loss.

In the iDRAC7 Web interface, go to Overview

→

Server

→

Attached Media.

Specify the required settings. For more information, see the

iDRAC7 Online Help

Click Apply to save the settings.

Configuring Virtual Media Using RACADM

To configure the virtual media,

•

Use the objects in the iDRAC.VirtualMedia group with the set command.

•

Use the objects in the cfgRacVirtual group with the config command.

For more information, see the

RACADM Command Line Reference Guide for iDRAC7 and CMC

available at dell.com/

support/manuals.

186

Summary of Contents for iDRAC7





























































































































































































































































Search results

Summary of Contents for iDRAC7

Reviews:

Related manuals for iDRAC7

Brands by name

Popular brands

Dell iDRAC7, User Manual

Search results

Summary of Contents for iDRAC7

Reviews:

Related manuals for iDRAC7

Brands by name

Popular brands