Figure 19. Removing a processor or DIMM blank
a. processor or DIMM blank
b. heat sink retention socket (4)
c. standoff (4)
Next steps
1. Install the processor and the heat sink.
2. Ensure that you install the processor or DIMM blank when you have removed a processor permanently.
3. Follow the procedure listed in the After working inside your system section.
Related References
Related tasks
on page 90
Installing a processor or DIMM blank
on page 69
Before working inside your system
on page 51
After working inside your system
on page 52
Installing a processor or DIMM blank
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
NOTE:
You must remove processor or DIMM blank when installing two processors or to service other components inside
the system.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Your system does not have processor or heat sink installed.
Installing and removing server module components
69
