![Dell EqualLogic FS7600 Installation And Setup Manual Download Page 13](http://html.mh-extra.com/html/dell/equallogic-fs7600/equallogic-fs7600_installation-and-setup-manual_84562013.webp)
Required Hardware That Is Not Supplied
You must provide additional hardware that is specific to your environment and not included in the shipping box.
See
Table 4: Required Hardware – Not Supplied
Component
Description
19 inch (48.3 cm),
four-post rack
Provides easy access to hardware in your computing environment. See
.
Network cables
Connects FS7600 network ports to a network switch.
Use Category 5E or Category 6 cables with RJ45 connectors. Use Category 5 cables
only if they meet the TIA/EIA TSB95 standard.
See
Network Configuration Overview on page 17
1GE network switch
Connects devices to a network. Multiple switch stacks are recommended. See
.
Rack Requirements
See your support provider for detailed information about supported racks.
The rack and the hardware installation must meet the following requirements:
•
Only four-post, square-hole or round-hole, tool-less racks are supported by default. The graphics in this
manual show a square-hole rack, but the installation instructions also apply to round-hole racks.
•
Use an industry-standard (for example, CEA-310-E), 48.3 cm (19 inch) rack.
•
The rack must be rated for 540 kg (1200 pounds) static load or greater.
•
The minimum rack depth is 100 cm (40 inches) from the front to the back of the rack.
•
The distance between the inside of the front and back rack posts (the mounting surfaces) must be 61 cm (24
inches) to 90 cm (36 inches).
•
Secure the rack to the floor for added stability.
•
At least 4.1 cm (1.6 inches) of space must be between the rack door and the front of the hardware to
accommodate the front bezel.
•
The rack (with installed hardware) must meet the safety requirements of UL 60950-1 and
IEC 60950-1.
•
Mount the hardware in a horizontal position. Any other position voids your warranty and support contract.
Switch Requirements
Dell recommends that you use a highly available network switch configuration for the client and SAN/internal
network connections.
7
Dell EqualLogic FS7600 Installation and Setup Guide
1 Before You Begin
Summary of Contents for EqualLogic FS7600
