Dell EqualLogic FS7600, Installation And Setup Manual

Page: 11 / 46

• In North America, connect the appliance to a source of power with overcurrent protection provided by a
20 A or less device (UL 489 circuit breakers). In Europe, the overcurrent protection must be provided by a
20 A or less device (IEC circuit breakers).
• Make sure enough space is available for airflow in front of and behind the appliance.
• Make sure the location is properly vented.
• Review the technical specifications in the following section to make sure your environment supports the
requirements.
Technical Specifications
Table 2 lists the technical specifications for the NAS appliance.
Table 2: FS7600 NAS Appliance Technical Specifications
Category Rating
AC Power Supply (per power supply)
Wattage Output 717 W
Heat dissipation
2446 BTU/hr
The heat dissipation is calculated using the power supply wattage rating. The
heat dissipation values are for the entire system, which includes the chassis and two
controllers.
Voltage
90 VAC to 264 VAC, autoranging, 47 Hz/63 Hz
This system is also designed to be connected to IT power systems with a phase to
phase voltage not exceeding 230 V.
Battery Power Supply
Battery 12.8 V to 13.2 V, 4.8 Ah to 6 Ah, 63 Wh to 77 Wh
Physical
Height 86.4 mm (3.4 in.)
Width
481.5 mm (18.96 in.)—with rack flange
446.3 mm (17.6 in.)—without rack flange
Depth
813.0 mm (32.0 in.)—with bezel and handle
741.0 mm (29.2 in.)—without bezel and handle
Weight (maximum
configuration)
30.5 kg (67 lb.)
Weight (empty) 12.86 kg (28.36 lb.)
Environmental
Operating temperature
Continuous operation: 5°C to 40°C (41°F to 104°F) with a maximum temperature
gradation of 20°C (68°F) per hour
Storage temperature
–40°C to 60°C (–40°F to 140°F) with a maximum temperature gradation of 20°C per
hour
Operational relative
humidity 20% to 80% (non-condensing) with maximum humidity gradation of 10% per hour at
maximum wet bulb temperature of 29°C (89°F)
5
Dell EqualLogic FS7600 Installation and Setup Guide 1 Before You Begin