Dell Edge Gateway 5000 Series, Service Manual

Page: 18 / 49

Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.
Procedure
1 Slide the solid-state drive into the solid-state drive slot.
2 Replace the screw that secures the solid-state drive to the system base.
3 Place the solid-state drive heat shield on the system board.
4 Replace the screws that secure the solid-state drive heat shield to the
system board.
Post-requisites
Replace the top cover .
18