Replacing the mobile
broadband card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless card, do not place any
cables under it.
1
Align the notch on the mobile broadband card with the tab on the mobile
broadband slot.
2
Insert the mobile broadband card into the mobile broadband card.
3
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the
wireless card supported by your computer.
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
white
Auxiliary (black triangle)
black
4
Place the mobile broadband card bracket on the system board.
5
Replace the screws that secures the mobile broadband card and bracket
to the system board.
Post-requisites
Replace the
top cover
.
24
Summary of Contents for Edge Gateway 5000 Series
Page 8: ... Flat head screwdriver Plastic scribe Hex screwdriver 8 ...
Page 13: ...3 Lift the top cover off the system base 1 top cover 2 system base 13 ...
Page 32: ...7 Remove the base frame off the bottom cover 1 base frame 32 ...
Page 44: ...7 Lift the system board and remove it off the base frame 1 screws 6 2 system board 44 ...