Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the
top cover
.
Procedure
1
Remove the screws that secures the wireless-card and bracket to the
system board.
2
Remove the bracket of the system board.
3
Disconnect the antenna cables from the wireless card.
19
Summary of Contents for Edge Gateway 5000 Series
Page 8: ... Flat head screwdriver Plastic scribe Hex screwdriver 8 ...
Page 13: ...3 Lift the top cover off the system base 1 top cover 2 system base 13 ...
Page 32: ...7 Remove the base frame off the bottom cover 1 base frame 32 ...
Page 44: ...7 Lift the system board and remove it off the base frame 1 screws 6 2 system board 44 ...
