Dell Edge Gateway 5000 Series, Service Manual

Page: 48 / 49

Clearing CMOS Settings
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
1 Remove the top cover .
2 Locate the password reset jumper (PASSWORD) on the system board. See
" System-board components ”.
3 Remove the jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
4 Wait for approximately five seconds to clear the CMOS setting.
5 Remove the jumper plug from pins 1 and 2 and replace it on pins 2 and 3.
1 pin 1 2 pin 2
3 pin 3 4 jumper plug
6 Replace the top cover .
Clearing Forgotten Passwords
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
" Before You Begin ." For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
NOTE: The computer must be disconnected from the electrical outlet to
clear the CMOS setting.
1 Remove the top cover .
48