Figure 97. Installing IDSDM card
Next steps
1.
.
NOTE:
Reinstall the MicroSD cards into the same slots that are based on the labels you had marked on the cards during
removal.
2.
.
3. Follow the procedure listed in
After working inside your system
on page 27.
Micro SD card
Removing the MicroSD card
Prerequisites
1. Follow the safety guidelines listed in the
on page 26.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4.
Steps
1. Locate the MicroSD card slot on the IDSDM module, and press the card to partially release it from the slot. To locate IDSDM
System board jumpers and connectors
section.
2. Hold the MicroSD card and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with its corresponding slot number after removal.
Installing and removing system components
93
