Steps
1. Unpack the new system board assembly.
NOTE:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the
chassis.
2. Holding the system board holder, lower the system board it into the system.
3. Incline the system board at an angle and align the connectors with the slots on the rear of the chassis.
4. Slide the system board towards the rear of the chassis until the connectors are firmly seated in the slots.
Figure 125. Installing the system board
5. Using a Phillips #2 screwdriver, fasten the screws that secure the system board to the chassis.
Next steps
1. Replace the following:
a.
NOTE:
The TPM Module must be replaced only while installing new system board.
b.
d.
e.
f.
g.
i.
Connect the fan cables
j.
k.
l.
n. Reconnect the cables to the system board.
Installing and removing system components
117
