1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
2.
Open the system.
3.
Disconnect any cables connected to the expansion card or expansion-card riser.
4.
Lift the expansion-card latch.
5.
To remove an expansion card from riser 2, pull the blue latch on the expansion-card holder.
6.
Hold the expansion card by its edges and remove it from the expansion-card connector on the riser.
7.
If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and
close the expansion-card latch.
NOTE: You must install a filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.
8.
Close the system.
9.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Figure 28. Removing and Installing the Expansion Card from Expansion-Card Riser 1
1. expansion card
2. expansion-card latch
3. riser touch points (2)
4. expansion-card riser 1
64
