Back-Panel Features And Indicators
Figure 6. Back-Panel Features and Indicators
Item
Indicator, Button, or
Connector
Icon
Description
1
PCIe expansion card slot 1
Allows you to connect one low-profile PCI Express
expansion card.
2
vFlash card slot
Allows you to connect the vFlash card.
3
iDRAC port (optional)
Dedicated management port on the iDRAC Ports card.
4
Serial connector
Allows you to connect a serial device to the system.
5
PCIe expansion card slot 2
Allows you to connect a full-height PCI Express expansion
card.
6
Video connector
Allows you to connect a VGA display to the system.
7
Ethernet connectors (2)
Integrated 10/100/1000 Mbps NIC connector.
8
USB connectors (2)
Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.
9
System identification
connector
Connects the optional system status indicator assembly
through the optional cable management arm.
10
System identification button
The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the system status
indicator on the back flashes until one of the buttons is
pressed again.
Press to toggle the system ID on and off. If the system
stops responding during POST, press and hold the system
ID button for more than five seconds to enter BIOS
progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15 seconds.
11
Power supply (PSU1)
350 W and 550 W
NOTE: For non-redundant power supply units, there is
only one power supply socket.
12
Power supply (PSU2)
17
