manualshive.com logo in svg

Dell E18S Series, Owner'S Manual, Page: 14 / 137

Share
Download
Dell E18S Series Owner'S Manual Download Page 14

Option

Description

iDRAC

Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields are IP, 
Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Two 
separate DNS entries are available.

Set error Select SEL to display LCD error messages in a format that matches the IPMI description in the SEL. This is 

useful when trying to match an LCD message with an SEL entry.
Select Simple to display LCD error messages in a simplified user-friendly description. See System Error 
Messages for a list of messages in this format.

Set home Select the default information to be displayed on the LCD Home screen. See View Menu to see the options 

and option items that can be set as the default on the Home screen.

View Menu

NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next 
action.

Option

Description

iDRAC IP

Displays the IPv4 or IPv6 addresses for the iDRAC7. Addresses include DNS (Primary and Secondary), 
Gateway, IP, and Subnet (IPv6 does not have Subnet).

MAC

Displays the MAC addresses for iDRAC, iSCSI, or Network devices.

Name

Displays the name of the Host, Model, or User String for the system

Number

Displays the Asset tag or the Service tag for the system.

Power

Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the 
Set home submenu of the Setup menu.

Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured in 

the Set home submenu of the Setup menu.

Diagnostic Indicators

The diagnostic indicators on the system front panel display error status during system startup.

NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a working 
power source and press the power button.

The following section describes system conditions and possible corrective actions associated with these indicators:

Health indicator

Condition

Corrective Action

If the system is on, and in good health, the indicator 
lights solid blue.

None required.

The indicator blinks amber if the system is on or in 
standby, and any error exists (for example, a failed 
fan or hard drive)

See the System Event Log or system messages for the 
specific issue.

14

Summary of Contents for E18S Series










































































































































Reviews:

No comments