Dell DX6112-SN Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 125

background image

Figure 29. Identifying Connectors on the Expansion Card Riser 3

1. expansion-card slot 6
2. expansion-card slot 7
3. power connector (for GPU cards)

4.

If applicable, remove or install an expansion card on the riser.

5.

Replace the expansion-card riser.

6.

Close the system.

7.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing Expansion-Card Risers

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.

1.

If applicable, reinstall the expansion card(s) into the expansion card riser.

2.

Align the expansion-card riser with the connector and the riser guide pin on the system board.

3.

Lower the expansion-card riser into place until the expansion-card riser is fully seated in the connector.

4.

Close the system.

5.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

6.

Install any device drivers required for the card as described in the documentation for the card.

SD vFlash Card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent
on-demand local storage and a custom deployment environment that allows automation of server configuration, scripts,
and imaging. It emulates USB device(s). For more information, see the

iDRAC7 User's Guide

at support.dell.com/

manuals.

Replacing An SD vFlash Card

1.

Locate the vFlash media slot on the system.

2.

To remove the installed SD vFlash card, push inward on the card to release it, and pull the card from the card slot.

63

«
...
61
62
63
64
65
...
»

Summary of Contents for DX6112-SN






























































































































Reviews:

No comments

Related manuals for DX6112-SN

Brand: tacwise Pages: 12

Brand: Total Pages: 11

Sorensen XG 100-15

Brand: Ametek Pages: 399

rescue pac 1600

Brand: SIP Pages: 6

Brand: Far Tools Pages: 22

Bravo 3-in-1 Potty

Brand: VONROC Pages: 24

Brand: ICON Pages: 8

Brand: TE Connectivity Pages: 8

Brand: Steren Pages: 2

Brand: BK Precision Pages: 42

Brand: Berker Pages: 2

Brand: Draper Pages: 12

Brand: Westfalia Pages: 46

Brand: Ingersoll-Rand Pages: 56

Brand: Steel City Pages: 32

ELG-150-C Series

Brand: Mean Well Pages: 12

Brand: Daiwa Pages: 5

Brand: Brunton Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands