Figure 30. Installing the (optional) 2.5 inch internal hard drive carrier
1
internal hard drive carrier guide
2
internal hard drive carrier
3
handle-lock
4
lock guide
5
hard drive retention screw (8)
6
internal hard drive cage
7
lock guide pin
8
guide slot
Next steps
1
Reconnect the power and data cables to the internal hard drives.
2
If removed, reinstall the PCIe expansion card riser.
3
If disconnected, reconnect the cables to the expansion card(s).
4
Reinstall the cooling shroud.
5
If required, open the expansion card latch on the cooling shroud to support the full length expansion card.
6
Follow the procedure listed in the After working inside your system section.
80
Installing and removing system components
