Figure 61. Removing the NDC
1.
captive screw socket (2)
2. connector on the system board
3. captive screw (2)
4. touch point (2)
5. network daughter card (NDC)
6. back panel slot for Ethernet connectors
Next steps
1.
Install the NDC.
2.
If removed, install the expansion card(s) on the expansion card riser 2.
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Installing the network daughter card
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
127
