Dell Dimension C7565 Owner'S Manual Download

Page: 59 / 140

Removing and Installing Parts

Removing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet

before removing the cover.

Follow the procedures in "Before You Begin" on page 53.

NOTICE:

Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk

top space.

NOTICE:

Ensure that you are working on a level, protected surface to avoid scratching either the

computer or the surface on which it is resting.

Lay your computer on its side with the computer cover facing up.

Pull back the cover release latch located on the top panel.

computer cover

cover latch release

back of computer

bottom hinges

C7565bk1.book Page 59 Wednesday, January 26, 2005 1:37 PM

Summary of Contents for Dimension C7565













































































































































Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands

Dell Dimension C7565, Owner'S Manual

Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands