Dell Dimension C7565 Owner'S Manual Download

Page: 22 / 140

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Changing the Display Settings

After you connect the monitor(s) or TV, turn on the computer.
The Microsoft

Windows

desktop displays on the primary monitor.

Enable clone mode or extended desktop mode in the display settings.
•

In clone mode, both monitors display the same image.

•

In extended desktop mode, you can drag objects from one screen to the other, effectively
doubling the amount of viewable work space.

For information on changing the display settings for your graphics card, see the user’s guide in
the Help and Support Center (click the

Start

button, click

Help and Support

, click

User and

system guides

, click

Device guides

, and then click the guide for your graphics card).

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTICE:

Plug the network cable into the network adapter connector on the computer. Do not plug the

network cable into the modem connector on the computer. Do not plug a network cable into a telephone
wall jack.

Connect the network cable to the network adapter connector on the back of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

network device

network adapter connector on computer

network cable

network adapter
connector

C7565bk1.book Page 22 Wednesday, January 26, 2005 1:37 PM

Summary of Contents for Dimension C7565













































































































































Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands

Dell Dimension C7565, Owner'S Manual

Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands