Dell Dimension C7565 Owner'S Manual Download

Page: 110 / 140

110

Appendix

www

.dell.com | support.dell.com

Security

This section displays available system security options.

Admin Password

This option provides restricted access to the computer's system setup
program in the same way that access to the system can be restricted with the

System Password

option.

System Password

Displays the current status of the system's password security feature and
allows a new system password to be assigned and verified.

Password Status

This option locks the system password field with the setup password. When
the field is locked, you can no longer disable password security by pressing
<Ctrl><Enter> when the computer starts.

Power Management

AC Recovery

Determines what happens when AC power is restored to the computer.

Auto Power On

Sets the computer to automatically turn on. Choices are

every day

or every

Monday through Friday

The default setting is

Off

This feature does not work if you turn off your computer using a power strip
or surge protector.

Auto Power Time

Sets time to automatically turn on the computer.

Time is kept in the standard 12-hour format (

hours:minutes

). Change the

startup time by pressing the right- or left-arrow key to increase or decrease
the numbers, or type numbers in both the date and time fields.

This feature does not work if you turn off your computer using a power strip
or surge protector.

Low Power Mode

When

Low Power Mode

is selected, remote wakeup events no longer power

up from

Hibernate

Off

Remote Wake Up

This option allows the computer to power up when a NIC or Remote
Wakeup-capable modem receives a wake up signal.

is the default setting.

On w/ Boot to NIC

allows the computer to

attempt to boot from a network prior to using the boot sequence.

NOTE:

Normally, the system can be powered up remotely from suspend mode,

hibernate mode, or when powered off. When

Low Power Mode

(in the

Power

Management

menu) is enabled, the computer can only be powered up

remotely from

Suspend

Suspend Mode

The options are

, a suspend state where the computer is running in a low-

power mode, and

, a standby state where the power is reduced or turned

off for most components, however, system memory remains active.

Maintenance

CMOS Defaults

This setting restores the computer’s default settings.

Event Log

Displays the system event log.

C7565bk1.book Page 110 Wednesday, January 26, 2005 1:37 PM

Summary of Contents for Dimension C7565













































































































































Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands

Dell Dimension C7565, Owner'S Manual

Search results

Summary of Contents for Dimension C7565

Reviews:

Related manuals for Dimension C7565

Brands by name

Popular brands