manualshive.com logo in svg

Dell Dimension 4700C, Owner'S Manual

Share
Download
Dell Dimension 4700C Owner'S Manual Download Page 9

Finding Information

9

Finding Information

 

NOTE: 

Additional documentation may be included with your computer, depending on your country.

What are you looking for?

Find It Here

• Warranty information
• Safety instructions
• Regulatory information
• Ergonomics information
• End User License Agreement
• Terms and Conditions

Dell™ Product Information Guide

• How to set up my computer 

Setup Diagram

• Express Service Code and Service Tag
• Microsoft

®

 Windows

®

 License Label

Express Service Code and Product Key Label

These labels are located on your 
computer.

•Use the Service Tag to identify your 
computer when you use support.dell.com 
or contact technical support.
•Enter the Express Service Code to direct 
your call when contacting technical 
support. The Express Service Code is not 
available in all countries.

Summary of Contents for Dimension 4700C





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands