manualshive.com logo in svg

Dell Dimension 4700C, Owner'S Manual

Share
Download
Dell Dimension 4700C Owner'S Manual Download Page 14

14

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may not come with a printer 
cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you 
purchased a printer cable at the same time you purchased your computer, the cable may arrive in 
the computer box. 

Connecting a USB Printer

 

NOTE: 

You can connect USB devices while the computer is turned on.

1

Complete the operating system setup, if you have not already done so.

2

Install the printer driver if necessary. See the documentation that came with your printer.

3

Attach the USB printer cable to the USB connectors on the computer and the printer. The 
USB connectors fit only one way.

Using a Media Card Reader

Use the Media Card Reader to transfer data directly to your computer.
The Media Card Reader supports the following memory types: 

•

CompactFlash Type I and II (CF I/II)

•

SmartMedia (SMC)

•

Memory Stick (MS/MS Pro)

USB printer cable

USB connector on computer

USB connector 
on printer

Summary of Contents for Dimension 4700C





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands