manualshive.com logo in svg

Dell Dimension 4700C, Owner'S Manual

Share
Download
Dell Dimension 4700C Owner'S Manual Download Page 88

88

Appendix

www

.dell.com | support.dell.com

USB Controller

Set to 

On

 (default) so that USB devices will be detected and supported in 

the operating system. The 

No Boot 

option enables a USB controller, but 

does not recognize a USB storage device.

Serial Port

Identifies and defines the serial port settings. 

Auto 

(default)

 

automatically 

configures a connector to a particular designation (

COM1

 or 

COM3

).

NOTE: 

If both resources are in use, the port is disabled.

Video

Primary Video

This setting specifies which video controller is primary when two video 
controllers are present on the computer.

Video Memory Size

Use this option to select 8 MB (default) or 1 MB of system memory for an 
integrated video controller. 

Performance

HyperThreading

If your computer’s processor supports Hyper-Threading, this option appears 
in the Options List.

HDD Acoustic Mode

•

Bypass

 — Your computer does not test or change the current acoustics 

mode setting.

•

Quiet

 (default) — The hard drive operates at its most quiet setting.

•

Suggested

 — The hard drive operates at the level suggested by the drive 

manufacturer.

•

Performance 

—

 

The hard drive operates at its maximum speed.

NOTE: 

Switching to performance mode may cause the drive to be noisier, but 

its performance is not affected.

NOTE: 

Changing the acoustics setting does not alter your hard drive image.

Security

This section displays available system security options.

DEP (Execute 

Disable)

•

Opt-In 

(default) — DEP is enabled by default on computers with 

NX-capable processors. Only Windows system binaries are covered by DEP 
with this option. Applications may enable DEP protection through creating 
an application compatibility shim and installing that shim with the 
application.

•

Opt-Out

 — DEP is enabled for all processes. Users can manually create 

exceptions for specific applications in System Properties, or IT Pros and 
ISVs can use the Application Compatibility Toolkit to opt-out.

•

Always On 

— Full DEP coverage with no exceptions.

•

Always Off 

—

 

No user-mode DEP coverage. Drivers and the Widows core 

kernel binaries are covered by DEP, but no other binaries are included in the 
set of covered applications.

Unlock Setup

Use this option with 

Admin Password 

to unlock setup options.

NOTE: 

This option appears only when the Admin Password option is enabled.

Summary of Contents for Dimension 4700C





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands