manualshive.com logo in svg

Dell Dimension 4700C, Owner'S Manual

Share
Download
Dell Dimension 4700C Owner'S Manual Download Page 28

28

Solving Problems

www

.dell.com | support.dell.com

CD and DVD drive problems

 

NOTE: 

High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a 

defect in the drive or the CD or DVD.

 

NOTE: 

Because of different regions worldwide and different disc formats, not all DVD titles work in all 

DVD drives.

Problems writing to a CD/DVD-RW drive

T

EST

 

THE

 

DRIVE

—

• Insert another floppy disk, CD, or DVD to eliminate the possibility that the original one is defective.
• Insert a bootable floppy disk and restart the computer.

NOTE: 

This system supports an optional USB floppy drive.

C

LEAN

 

THE

 

DRIVE

 

OR

 

DISK

—

See page 93.

C

HECK

 

THE

 

CABLE

 

CONNECTIONS

R

UN

 

THE

  H

ARDWARE

  T

ROUBLESHOOTER

—

See page 50.

R

UN

 

THE

  D

ELL

  D

IAGNOSTICS

—

See page 46.

A

DJUST

 

THE

  W

INDOWS

 

VOLUME

 

CONTROL

—

• Click the speaker icon in the lower-right corner of your screen.
• Ensure that the volume is turned up by clicking the slidebar and dragging it up.
• Ensure that the sound is not muted by clicking any boxes that are checked.

C

HECK

 

THE

 

SPEAKERS

 

AND

 

SUBWOOFER

—

See "Sound and Speaker Problems" on page 39.

C

LOSE

 

OTHER

 

PROGRAMS

—

The CD/DVD-RW drive must receive a steady stream of data when 

writing. If the stream is interrupted, an error occurs. Try closing all programs before you write to the 
CD/DVD-RW.

T

URN

 

OFF

  S

TANDBY

 

MODE

 

IN

  W

INDOWS

 

BEFORE

 

WRITING

 

TO

 

A

  C D / D V D - R W  

DISC

—

See page 23 

or search for the keyword 

standby

 in Windows Help for information on power management modes.

Summary of Contents for Dimension 4700C





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands