manualshive.com logo in svg

Dell Dimension 4700C, Owner'S Manual

Share
Download
Dell Dimension 4700C Owner'S Manual Download Page 77

Removing and Installing Parts

77

c

To release the modem connector, gently open the tabs on each side of the external clip 
that holds the external modem connector in place.

d

Lift the modem cable and connector from the computer.

5

To install a new modem cable and external modem connector:

a

Align the external connector with the slot on the back on the computer.

b

Press on each side of the external clip and secure the external modem connector in place. 

c

Push on the back of the modem connector to make sure that the external clip completely 
engages and fits tightly against the back of the computer.

d

Place the modem cable and ground wire in the cable clip and secure the clip to the 
computer chassis with the screw.

e

Carefully route the cable and ground wire around the processor making sure that you 
keep the wires away from any internal parts.

6

Attach the modem cable and ground wire to the modem:

a

Connect the modem cable to the modem.

b

Replace the screw that secures the ground wire to the modem and system board.

7

Align the fan with the holes on the heat sink and replace the two screws.

8

Close the computer cover (see page 80).

screw

cable clip

exposed ground wire

modem cable

modem connector

tabs (2)

chassis hole

external clip

Summary of Contents for Dimension 4700C





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands