Back to Contents Page
System Setup Program
Dell™ Dimension™ 4600C Service Manual
Overview
Entering the System Setup Program
Clearing Forgotten Passwords
Overview
The system setup program contains the standard settings for your computer.
You can use the system setup program as follows:
l
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change user-selectable options
—
for example, the user password
Dell recommends that you write down the system setup program screen information for future reference.
Entering the System Setup Program
Viewing Settings
1.
Turn on (or restart) your computer.
2.
When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft
®
Windows
®
desktop. Then shut down your
computer and try again.
See the following figure for an example of the main program screen.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes might make your computer work
incorrectly.
Summary of Contents for Dimension 4600C
Page 5: ...Back to Contents Page ...
Page 13: ...Back to Contents Page ...
Page 34: ...Back to Contents Page ...
