Dell D24M, Service Manual

Page: 42 / 99

Steps
1. Assemble the WLAN module with the SMA antenna.
2. Connect the antenna cable to the WLAN module.
3. Replace the plastic bracket on the antenna connectors of the WLAN module.
4. Insert the WLAN module into the M.2 slot on the system board.
5. Replace PCIe bracket into its slot on the chassis.
6. Route the antenna cables along the rubber guides on the system board and replace the single (M2x3.5) screw securing the
WLAN module to the system board.
Next steps
1. Close the psu hinge .
2. Install the cover .
3. Follow the procedure in after working inside your computer .
IO panel
Removing the IO panel
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the cover .
3. Open the psu hinge .
4. Remove the bezel .
5. Remove the optical drive .
About this task
The following images indicate the location of the IO panel and provides a visual representation of the removal procedure.
42 Disassembly and reassembly