Dell D16S Service Manual Download

Page: 37 / 89

About this task

The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.

Steps

1. Connect the antenna cables to the WLAN card.

The following table provides the antenna-cable color scheme for the WLAN card of your computer.

Table 8. Antenna-cable color scheme

Connectors on the

wireless card

Antenna-cable color

Silkscreen marking

Main

White

MAIN

△

(white triangle)

Auxiliary

Black

AUX

▲

(black triangle)

2. Place the WLAN card bracket to secure the antenna cables.
3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the

system board.

4. Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.

Next steps

1. Install the

hard-drive assembly

Disassembly and reassembly

Summary of Contents for D16S


























































































Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands

Dell D16S, Service Manual

Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands