Dell D16S, Service Manual

Page: 43 / 89

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the fan assembly .
2. Install the front bezel .
3. Install the top cover (side bezel) .
4. Install the side cover .
5. Follow the procedure in after working inside your computer .
Riser card
Removing the riser card
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the top cover (side bezel)
4. Remove the front bezel .
5. Remove the fan assembly .
NOTE: This step is valid for system configuration that is shipped with 80 W CPU.
About this task
The following images indicate the location of the riser card and provide a visual representation of the removal procedure.
Disassembly and reassembly 43