Dell D16S Service Manual Download

Page: 39 / 89

About this task

The following image indicates the location of the speaker and provides a visual representation of the installation procedure.

Steps

1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Connect the speaker cable to the system board.

Next steps

1. Install the

front bezel

2. Install the

top cover (side bezel)

3. Install the

side cover

4. Follow the procedure in

after working inside your computer

Fan assembly

Removing the fan assembly

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

side cover

3. Remove the

top cover (side bezel)

4. Remove the

front bezel

About this task

The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.

Disassembly and reassembly

Summary of Contents for D16S


























































































Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands

Dell D16S, Service Manual

Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands