Dell D16S Service Manual Download

Page: 34 / 89

Steps

1. Place the hard drive into the bracket.
2. Align and insert the pins on the drive bracket with the slots on the drive.

NOTE:

Note the orientation of the hard drive so that you can replace it correctly.

Next steps

1. Install the

2.5 in. hard-drive assembly

2. Install the

front bezel

3. Install the

top cover (side bezel)

4. Install the

side cover

5. Follow the procedure in

after working inside your computer

Installing the 2.5 in. hard drive assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the hard drive assembly and provides a visual representation of the installation
procedure.

Disassembly and reassembly

Summary of Contents for D16S


























































































Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands

Dell D16S, Service Manual

Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands