Dell Alienware Area-51 R5, Service Manual

Page: 34 / 121

Replacing the right AlienFX side-panel connector
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer . After working inside your computer, follow the instructions in After working
inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1. Route the cable through the slot on the bracket and align the screw holes on the right AlienFX side-panel connector with the
screw holes on the bracket.
2. Replace the two screws (#6-32x6) that secure the right AlienFX side-panel connector to the bracket.
3. Align the screw hole on the right AlienFX side-panel connector assembly with the screw hole on the chassis.
4. Replace the screw (#6-32x6) that secures the right AlienFX side-panel connector assembly to the chassis.
5. Route the right AlienFX side-panel cable through the routing guides on the chassis.
6. Connect the cable that connects the right AlienFX side-panel connector to the I/O board. See “
I/O-board components ”.
Post-requisites
1. Replace the left and right side-panels. See “ Replacing the side panels ”.
2. Replace the stability foot .
34