manualshive.com logo in svg

Dell Alienware Area-51 R5, Service Manual, Page: 110 / 121

Share
Download
Dell Alienware Area-51 R5 Service Manual Download Page 110

17. Double-click the graphics driver file icon and follow the instructions on the screen to install the driver.

Downloading the USB driver

1. Turn on your computer.
2. Go to 

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click Submit.

NOTE: If you do not have the Service Tag, use the autodetect feature or manually browse for your computer model.

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

NOTE: Review on-screen instructions for browser-specific instructions.

8. Click View Drivers for My System.
9. Click Download and Install to download and install all driver updates detected for your computer.
10. Select a location to save the files.
11. If prompted, approve requests from User Account Control to make changes on the system.
12. The application installs all drivers and updates identified.

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Chipset in the drop-down list.
15. Click Download to download the USB driver for your computer.
16. After the download is complete, navigate to the folder where you saved USB driver file.
17. Double-click the USB driver file icon and follow the instructions on screen to install the driver.

Downloading the chipset driver

1. Turn on your computer.
2. Go to 

www.dell.com/support

.

3. Enter the Service Tag of your computer, and then click Submit.

NOTE: If you do not have the Service Tag, use the autodetect feature or manually browse for your computer model.

4. Click Drivers & downloads.
5. Click the Detect Drivers button.
6. Review and agree to the Terms and Conditions to use SupportAssist, then click Continue.
7. If necessary, your computer starts to download and install SupportAssist.

NOTE: Review on-screen instructions for browser-specific instructions.

8. Click View Drivers for My System.
9. Click Download and Install to download and install all driver updates detected for your computer.
10. Select a location to save the files.
11. If prompted, approve requests from User Account Control to make changes on the system.
12. The application installs all drivers and updates identified.

NOTE: Not all files can be installed automatically. Review the installation summary to identify if manual installation is
necessary.

13. For manual download and installation, click Category.
14. Click Chipset in the drop-down list.
15. Click Download to download the appropriate chipset driver for your computer.
16. After the download is complete, navigate to the folder where you saved the chipset driver file.
17. Double-click the chipset driver file icon and follow the instructions on the screen to install the driver.

110

Summary of Contents for Alienware Area-51 R5


























































































































Reviews:

No comments