IPv6
Dell 7330 Mono Laser Printer
3-27
Automatic Address Assignment
Addresses can be assigned automatically when a router is found that offers one or more
prefixes. Automatically assigned addresses are routeable. Each router-supplied prefix is
combined with the Interface ID to create an address. The use of router-supplied prefixes is
enabled by default.
To enable/disable automatic address assignment, use one of the following options:
■
The printer’s control panel
■
Embedded Web Server
Enabling/Disabling Automatic Address Assignment with the Control Panel
To set the Interface ID on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Connection Setup
, and then press the
OK
button.
3.
Select
Network Setup
, and then press the
OK
button.
4.
Select
TCP/IPv6 Setup
, and then press the
OK
button.
5.
Select
Auto Assign
, and then press the
OK
button to turn Auto Assign
On
or
Off
.
Enabling/Disabling Automatic Address Assignment with the Embedded Web Server
To set the Interface ID with EWS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel, and then click
TCP/IP
.
5.
Click the
TCP/IP (v6)
button.
6.
Select/deselect
Use router supplied prefixes
.
7.
Click the
Save Changes
button at the bottom of the page.
