Printer Settings
Dell 7330 Mono Laser Printer
5-2
Printer Settings
This topic includes:
■
Accessing Power Saver
on page 5-2
■
Selecting Output Options
on page 5-3
■
Accessing the Startup Page
on page 5-4
■
Accessing Load Paper Timeout
on page 5-5
■
Selecting Tray Settings
on page 5-6
■
Changing Printer Language
on page 5-8
Accessing Power Saver
To save energy, the printer enters a Power Saver, low-energy consumption mode after a
pre-defined period of time since its last activity. In this mode, most printer electrical systems
are shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You
can also warm up the printer by pressing the
OK
button on the control panel.
If you find that the printer is going into Power Saver mode too often and you do not want to
wait while the printer warms up, increase the length of time before the printer goes into Power
Saver mode. Change the timeout value as follows:
1.
On the control panel, select
Printer Setup
, and then press the
OK
button.
2.
Select
Printer Controls
, and then press the
OK
button.
3.
Select
Power Saver
, and then press the
OK
button.
4.
Press the
Down Arrow
or
Up Arrow
button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the printer goes
into Power Saver mode.
5.
Press the
OK
button.
