IPv6
Dell 7330 Mono Laser Printer
3-29
Manual Address Assignment
A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a
manual address, enter the IPv6 address and prefix length in the fields provided in EWS. The
default prefix length is 64.
To manually set the IPv6 address, use one of the following options:
■
The printer’s control panel
■
Embedded Web Server
Setting the IPv6 Address with the Control Panel
To set the IPv6 address on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Connection Setup
, and then press the
OK
button.
3.
Select
Network Setup
, and then press the
OK
button.
4.
Select
TCP/IPv6 Setup
, and then press the
OK
button.
5.
Select
Manual Address
, and then press the
OK
button to turn manual addressing on.
6.
Select
Manual Address
, and then press the
OK
button.
7.
To set the address:
a.
Use the
Up Arrow
and
Down Arrow
buttons to set the first number, and then press
the
OK
button.
b.
Continue setting individual numbers, pressing the
OK
button after setting each one.
When you get to the end of the address, press the
OK
button to return to the menu.
Setting the IPv6 Address Using the Embedded Web Server
To manually set the IPv6 address using EWS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel, and then click
TCP/IP
.
5.
Click the
TCP/IP (v6)
button.
6.
In the Manual Address Assignment field, select
Use this address
, and then type the
address.
7.
Click the
Save Changes
button at the bottom of the page.