IPv6
Dell 7330 Mono Laser Printer
3-25
IPv6
This section includes:
■
Enabling IPv6
on page 3-25
■
Setting the Interface ID
on page 3-26
■
Automatic Address Assignment
on page 3-27
■
DHCPv6
on page 3-28
■
Manual Address Assignment
on page 3-29
■
Address Precedence
on page 3-30
Enabling IPv6
IPv6 can be enabled or disabled independently of IPv4.
Note:
If you disable both IPv4 and IPv6, you will lose your connection to the printer. For
information on restoring the default TCP/IP settings, see
Resetting the TCP/IP Configuration
on page 3-26.
To enable/disable IPv6, use one of the following options:
■
The printer’s control panel
■
Embedded Web Server
Using the Control Panel
To enable/disable IPv6 on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Connection Setup
, and then press the
OK
button.
3.
Select
Network Setup
, and then press the
OK
button.
4.
Select
TCP/IPv6 Setup
, and then press the
OK
button.
5.
Select
IPv6
, and then press the
OK
button to switch between
On
and
Off
.
Using the Embedded Web Server
To enable/disable IPv6 using EWS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel, and then click
TCP/IP
.
5.
Click the
TCP/IP (v6)
button.
6.
Select the
TCP/IP v6 Enabled
check box to enable TCP/IP v6.
7.
Click the
Save Changes
button at the bottom of the page.
