56
Command Description
mount BlkDevice [sname[:]]
Mounts a file system on a block device
mv [src…] [dst]
Move one or more files/directories to destination
pause
Prompts to quit or continue (scripts only)
pci [bus_dev] [func]
Displays PCI device information
rconnect DeviceHandle# [DriverHandle#
[ChildHandle#]] | [-r]
Reconnects one or more drivers from a device
reset [reset_string]
Performs a cold reset
rm file/dir [file/dir]
Removes files or directories
setsize file
Sets size of a new file
stall microseconds
Delays for the specified number of microseconds
time [hh:mm:ss]
Gets or sets the time
type [-a] [-u] [-b] file
Displays the contents of a file
ver
Displays version information
vol fs [volume_label]
Sets or displays a volume label
Firmware Upgrades
Use the Firmware Update Utility to upgrade the firmware. This utility is an EFI application that
updates the following server management controllers:
•
Baseboard Management Controller (BMC)
•
Hot-swap Controller (HSC)
You can run the utility interactively by providing commands through the EFI shell, or you can run
it in non-interactive mode by supplying the command with any options. For information on the
command-line options, see Table 6.
NOTE
Review the firmware release notes that come with the software for additional
instructions before updating either the boot code or the operational code.
Summary of Contents for 3250
Page 1: ...Dell TM PowerEdge TM 3250 SR870BH2 Systems Product Guide Model Code SVS ...
Page 22: ...22 ...
Page 240: ......
