148
Console Configuration
1. Boot the console into the operating system.
2. Launch HyperTerminal by clicking the Start button in the task bar.
3. Select
Programs>Accessories>Communications and click HyperTerminal.
4. At
the
Connection Description window, type
guest
for the name and click OK.
5. At
the
Connect To window, select the COM port of the console that the null modem is
connected. In this example, it is COM1.
6. At
the
COM1 Properties window, select 19200 for the Bits per second (Baud rate) box to the
SMU configuration on the server.
7. Select
None for the Flow Control to match the BMC configuration.
8. Leave the default settings for the other boxes. Click OK to accept the settings and enter the
HyperTerminal screen. The PING message sent by the BMC is displayed as characters on the
HyperTerminal screen.
9. Press the <ESC> key followed by <(> to enable Terminal Mode and end the PING messages.
[TMODE OK]
is displayed.
10. Type
[SYS TMODE],
it is case sensitive and must be in uppercase. The response is
[OK
TMODE]
indicating that Terminal Mode is functioning.
Logging Into the Terminal Mode Session
Reminder: Guest was the password set for the Anonymous User in the BMC.
1. At
the
HyperTerminal screen enter
[SYS PWD –N guest]
to login.
-N
represents the
Anonymous User;
guest
is the password. This text is case sensitive. The screen returns
[SYS]
and
[OK]
to indicate a successful login.
2. Type any supported terminal mode command.
3. To log out type
[SYS PWD –X]
User Configuration
A user must be configured through the SMU to make full use of terminal mode. To create a user,
navigate to the SMU user configuration screen. Enter any username and password combinations
desired. Make sure to check the box that enables a particular user for use on the serial channel. If
this is not done, the username is not useable on the serial channel for terminal mode. Configure the
user with the desired maximum privilege level. See User Configuration Sub-task for details about
the user configuration screens.
Spaces, left bracket characters or right bracket characters are not allowed in usernames or
passwords used with terminal mode.
Summary of Contents for 3250
Page 1: ...Dell TM PowerEdge TM 3250 SR870BH2 Systems Product Guide Model Code SVS ...
Page 22: ...22 ...
Page 240: ......
