manualshive.com logo in svg

Dell 3130cn - Color Laser Printer, Service Manual

Share
Download
Dell 3130cn - Color Laser Printer Service Manual Download Page 56

1 - 30

Chapter 1   Troubleshooting

Version 1   2008.02.15

Belt

CRUM ID
009-371

Reseat
Belt Unit

An unsupported Belt 
Unit is installed.

Open the Front Cover. 
Remove the unsup-
ported Belt Unit and 
install a supported one.
Please click the Show 
Me How Button for 
details.

009-371

<IOT Belt Unit CRUM ID Error>
The Belt Unit CRUM ID error is 
detected.
The Belt Unit CRUM ID read by the 
sensor is different from the one that 
was recorded.

Flows 57

FIP1.57

Ready to Print
094-422

Replace Belt
Contact Support

Contact customer sup-
port if this failure is 
repeated.

094-422

<IOT Belt Unit Life Warning>
The Belt Unit Counter is going to 
reach the replacement time.

Flows 58

FIP1.58

Insert Belt Unit
094-910

Insert
Belt Unit

The Belt Unit is either 
missing or not fully 
inserted into the printer.

Open the Front Cover 
and make sure that the 
Belt Unit have been fully 
installed.
Please click the Show 
Me How Button for 
details.

094-910

<IOT Belt Unit Detached>
The Belt Unit Detached is detected.

Flows 59

FIP1.59

Belt Unit
094-911

Replace Belt
Contact Support

The Belt Unit needs to 
be replaced now.

Remove the used Belt 
Unit and install a new 
one.
Please click the Show 
Me How Button for 
details.

094-911

<IOT Belt Unit Life Over>
The Belt Unit Counter has reached 
the replacement time.

Flows 60

FIP1.60

Problem

Error Message

Error Contents

FIP to be 

referred

LCD

Status Window

Flip

Flip

Flip

Flip

Summary of Contents for 3130cn - Color Laser Printer























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands