manualshive.com logo in svg

Dell 3130cn - Color Laser Printer, Service Manual

Share
Download
Dell 3130cn - Color Laser Printer Service Manual Download Page 155

1 - 129

Chapter 1   Troubleshooting

Version 3   2008.05.30

Flows 75   Ready to Print  193-700

- This message appears when [Non-Dell Toner] setting of [Maintenance] on [Admin 
Menu] is turned to [ON] for using non-Dell toner cartridge.
Printing is available while this message is displayed.
Use of a non-Dell print cartridge may result in some of the printer's functions to be 
unavailable, a reduction in print quality, or deterioration of printer's reliability. Use 
of a new Dell brand print cartridge is recommended for your printer.
- When you use Dell toner cartridge, you can turn off the message by turning the 
[Non-DELL Toner] setting to [OFF].
- Use of a non-Dell print cartridge may result in some of the printer's functions to 
be unavailable, a reduction in print quality, or deterioration of printer's reliability. 
Use of a new Dell brand print cartridge is recommended for your printer.
The Dell warranty does not cover any problems caused by the use of any 
accessory, part, or component that is not supplied by Dell.
If this error code is displayed although the [Non-Dell Toner] setting is [OFF], follow 
the following flow.

Checking the error

Does the error

still occur when the

power is turned off

and on?

No

Yes

END

Replace the PWBA  ESS.
(Refer to Removal 26
Replacement 18)

Summary of Contents for 3130cn - Color Laser Printer























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands