manualshive.com logo in svg

Dell 3130cn - Color Laser Printer, Service Manual

Share
Download
Dell 3130cn - Color Laser Printer Service Manual Download Page 231

1 - 205

Chapter 1   Troubleshooting

Version 4.3   2009.08.21

FIP1.25   016-300/016-301/016-302/016-310/016-313/016-315/016-317/016-323/016-327/

016-340/016-344/016-345/016-346/016-347  Restart / Erase Flash Err.  016-392 / 
Write Flash Err.  016-393 / Verify Error  016-394

Reference_1:
1. Make sure that the printer is connected to the computer via USB port or Parallel port (remove the 

network cable). Then, try downloading as follows:

1) Power on the printer while pressing the <X Cancel> and <

3

> buttons.

2) Press <

T

> button to select "F/W Download DL Mode Parallel" or "F/W Download DL Mode 

USB", and then press <

3

> button.

3) The printer goes into the Download Mode with a message "Download Mode Ready. Then, 

activate firmware update tool and follow the instruction displayed.

While the firmware download is being executed, the printer displays a message 
"Writing...... F/W", and the computer displays a progress bar and may be restarted 
during the downloading process. Never power off the printer or the computer until 
the downloading process completes, and never interrupt the downloading pro-
cess. 

Step

Check

Yes

No

Possible causative parts:
PWBA ESS (PL9.1.27)

1

Checking the error code.
Error code is 016-317 or 016-340?

Go to step 2.

Go to step 3.

2

Download the latest version of the firmware from the Dell 
support website, and update the firmware with "F/W Down-
load DL Mode". (Refer to Refernce_1.) 
Does the error still occur when the power is turned off and 
on?

Replace the 

PWBA ESS. 

(Removal 26/

Replacement 18)

End of work

3

Check whether the version of the firmware is the latest, 
referring to the Printer Information via the Tool Box.
Checked by [Printer Information] of the [Printer Settings 
Report] tab in Tool Box.
For the latest version information, refer to the Dell Support 
Web Site.
Is the firmware the latest version?

Replace the 

PWBA ESS. 

(Removal 26/

Replacement 18)

Download the lat-

est version of the 

firmware from the 
Dell Support Web 

Site.

Summary of Contents for 3130cn - Color Laser Printer























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands