Dell 1600 Mono Laser, Owner'S Manual

Page: 30 / 134

2 0
U n d e r s t a n d i n g t h e S o f t w a r e
www
.dell.com/supplies | support.dell.com
Assigning an IP Address
Before using the printer on the network, you must set an IP address, subnet mask, and
gateway for the multi-function printer. If you want DHCP or BOOTP to automatically set
the IP address, a DHCP or BOOTP server must exist on the network.
To configure the IP address manually, you can use the supplied Drivers and Utilities CD.
Print the Configuration page of the printer to see the current network configuration and
MAC address. You will need this information to configure the printer for the network.
1
Make sure that the multi-function printer is connected to your network and powered
on. Close all unnecessary programs.
2
Insert the Drives and Utilities CD.
3
If necessary, select a language by pressing the Language button on the main screen.
4
Select SetIP Address Utility . The list of printers available in the network displays.
5
Select the printer you want to assign an IP to. The printer’s default IP address can be
found on the Configuration page for the printer.
6
When you finish setting the IP address for the printer, exit the program.
Installing Dell Software For Network Printing
When you connect your printer to the network, you must first configure the TCP/IP
settings for the printer. After you have assigned and verified the TCP/IP settings, you are
ready to install the Dell software on each network computer.
You can install the Dell software on the network computers locally or remotely.
NOTE: You need administrative access to install printer drivers on the network computers.
1
Make sure that the printer is connected to your network and powered on. Close all
unnecessary programs. For details about connecting on the network, see page 11.
2
Insert the Drivers and Utilities CD.
3
If necessary, select a language by pressing the Language button on the main screen.
4
Select Network Installation .
5
If you want to install the drivers on this computer for network operation, select Local
Installation , and click Next .
If you want to install the Dell software on the remote computers or network servers on
the same network, select
Remote Installation . The domain administrator’s ID and
password are required. Select the client computer(s) in the same domain on a network
and click
Next .