Dell 1355 Color User Manual Download Page 59

Page: 59 / 522

Setting the IP Address

Type ping

xx.xx.xx.xx

(where

xx.xx.xx.xx

is the IP address of

your printer).

Reply from the IP address denotes printer is active on the network.

Printing and Checking the Printer Settings Page

Print the printer settings page and check your printer's IP address.

The Operator Panel

Press the

(Menu)

button.

Press the

button until

System

is highlighted, and then press the

button.

Press the

button until

Report/List

is highlighted, and then press

the

button.

Ensure that

System Settings

is highlighted, and then press the

button.
The system settings page is printed.

Confirm the IP address next to

IP Address

under

Wired Network

on the

printer settings page. If the IP address is

0.0.0.0

, wait for a few minutes

to resolve the IP address automatically, and then print the system settings

page again.

If the IP address is not resolved automatically, see "Assigning an IP Address

(for IPv4 Mode)" on page 53.

The Tool Box

NOTE:

Click

Start



All Programs



Dell Printers



Dell 1355 Multifunction

Color Printer



Tool Box

NOTE:

The Select Printer dialog box opens in this step, when multiple printer drivers

are installed on your computer. In this case, click the name of Dell 1355 Multifunction
Color Printer listed in Printer Name, and then click OK.

The

Tool Box

opens.

Click the

Printer Settings Report

tab.

Select

Reports

from the list at the left side of the page.

Summary of Contents for 1355 Color











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands

Dell 1355 Color, User Manual

Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands