Dell 1355 Color User Manual Download Page 289

Page: 289 / 522

Faxing

287

Press the

button until

Admin Menu

is highlighted, and then press the

button.

Press the

button until

Fax Settings

is highlighted, and then press

the

button.

Press the

button until

Country

is highlighted, and then press the

button.

Press the

button to select the country where the printer is used, and

then press the

button.

Ensure that

Are You Sure?

is displayed, press the

button to select

Yes

, and then press the

button.

The printer restarts automatically to apply the settings.

NOTE:

In case of either one, when you configure the country setting, the

information, which is registered to the device, is initialized.

Setting the Printer ID

In most countries, you are required by law to indicate your fax number on any

fax you send. The printer ID, containing your telephone number and name or

company name, will be printed at the top of each page sent from your printer.

Press the

(Menu)

button.

Press the

button until

System

is highlighted, and then press the

button.

Press the

button until

Admin Menu

is highlighted, and then press the

button.

Press the

button until

Fax Settings

is highlighted, and then press

the

button.

Press the

button until

Fax Number

is highlighted, and then press

the

button.

Enter your fax number using the number keypad.

NOTE:

If you make a mistake while entering numbers, press the

(Backspace) button to delete the last digit.

Press the

button when the number on the display is correct.

Press the

button until

Company Name

is highlighted, and then press

the

button.

Summary of Contents for 1355 Color











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1355 Color

Reviews:

Dell 1355 Color, User Manual, Page: 289 / 522

Search results

Summary of Contents for 1355 Color

Reviews: