Dell 1355 Color User Manual Download Page 377

Page: 377 / 522

Understanding the Printer Menus

375

Phone Book

Use the

Phone Book

menu to configure the speed dial and group dial

settings.

Speed Dial

Purpose:

To store up to 99 frequently dialed numbers in speed dial locations.

See also:

"Storing a Number for Speed Dialing" on page 311.

Group Dial

Purpose:

To create a group of fax destinations and register it under a two-digit dial

code. Up to 6 group dial codes can be registered.

See also:

"Setting Group Dial" on page 314.

Network

Use the

Network

menu to change the printer settings affecting jobs sent to

the printer through the wired or wireless network.

NOTE:

Values marked by an asterisk (*) are the factory default menu settings.

Ethernet

Purpose:

To specify the communication speed and the duplex settings of Ethernet.

The change becomes effective after the printer is turned off and then on.

Values:

Auto*

Detects the Ethernet settings automatically.

10BASE-T Half

Uses 10base-T half-duplex.

10BASE-T Full

Uses 10base-T full-duplex.

Summary of Contents for 1355 Color











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands

Dell 1355 Color, User Manual

Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands