Dell 1355 Color User Manual Download Page 198

Page: 198 / 522

196

Print Media Guidelines

• Do not use label sheets that have adhesive to the edge of the sheet. It is

recommended that zone coating of the adhesive is done at least 1 mm

(0.04 inches) away from edges. Adhesive material contaminates your

printer and could void your warranty.

CAUTION:

Otherwise the printer occur in a jam and contaminate your printer and

your cartridges with adhesive. As a result, could void your printer and cartridge
warranties.

Storing Print Media

For proper print media storage, the following guidelines help avoid media

feeding problems and uneven print quality.

• For best results, store print media in an environment where the

temperature is approximately 21°C (70°F) and the relative humidity is

40%.

• Store cartons of print media on a pallet or shelf, rather than directly on the

floor.

• If you store individual packages of print media out of the original carton,

ensure that they rest on a flat surface so that the edges do not buckle or

curl.

• Do not place anything on top of the print media packages.

Identifying Print Media and Specifications

This section provides information on supported paper sizes, types, and

specification.

Supported Paper Sizes

Multipurpose Feeder

(MPF)

Priority Sheet Inserter

(PSI)

A4 (210x297 mm)

B5 (182x257 mm)

A5 (148x210 mm)

C5 (162x229 mm)

Summary of Contents for 1355 Color











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands

Dell 1355 Color, User Manual

Search results

Summary of Contents for 1355 Color

Reviews:

Related manuals for 1355 Color

Brands by name

Popular brands