manualshive.com logo in svg

Dell EMC VMAX, Configuration And Best Practices Technical Notes

Share
Download
Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 39

39 

 

   1 port1\path0\tgt6\lun3  c1t6d3     FA  2d:61 active   alive      0      0 
   1 port1\path0\tgt5\lun3  c1t5d3     FA  2d:60 active   alive      0      0 
 
Pseudo name=harddisk4 
Symmetrix ID=000195703184 
Logical device ID=015B 
Device WWN=60000970000195703184533030313542 
state=alive; policy=SymmOpt; queued-IOs=0 
============================================================================== 
--------------- Host ---------------   - Stor -  -- I/O Path --   -- Stats --- 
###  HW Path               I/O Paths    Interf.  Mode     State   Q-IOs Errors 
============================================================================== 
   2 port2\path0\tgt6\lun4  c2t6d4     FA  1d:60 active   alive      0      0 
   2 port2\path0\tgt5\lun4  c2t5d4     FA  1d:61 active   alive      0      0 
   1 port1\path0\tgt6\lun4  c1t6d4     FA  2d:61 active   alive      0      0 
   1 port1\path0\tgt5\lun4  c1t5d4     FA  2d:60 active   alive      0      0 

The devices are no longer SRDF devices and the host is accessing devices on the target array only. The source devices are no longer 
accessible, though they are not removed by NDM. 

C:\>symdev show 013 -sid 0129 
 
   Device Physical Name : 

\\.\PHYSICALDRIVE11  

 
   Device Symmetrix Name    : 00013 
   Device Serial ID         : 2900013000 
   Symmetrix ID             : 000197800129 
 
   Number of RAID Groups    : 0 
   Encapsulated Device      : No 
   Encapsulated WWN         : N/A 
   Encapsulated Device Flags: None 
 
   Encapsulated Array ID    : N/A 
   Encapsulated Device Name : N/A 
   Attached BCV Device      : N/A 
 
   Attached VDEV TGT Device : N/A 
 
   Vendor ID                : EMC 
   Product ID               : SYMMETRIX 
   Product Revision         : 5977 
   Device WWN               : 60000970000197800129533030303133 
   Device Emulation Type    : FBA 
   Device Defined Label Type: N/A 
   Device Defined Label     : N/A 
   Device Sub System Id     : N/A 
   Cache Partition Name     : DEFAULT_PARTITION 
   Bound Pool Name          : SRP_1 
  
   Device Block Size        : 512 
 
   Device Capacity 
       { 
       Cylinders            : 27307 
       Tracks               : 409605 
       512-byte Blocks      : 104858880 

Summary of Contents for VMAX



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands