manualshive.com logo in svg

Dell EMC VMAX, Configuration And Best Practices Technical Notes

Share
Download
Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 24

24 

 

Device Pairs (4): OK 
{ 
  Source        Target 
  Dev    Status Dev    Status 
  ------ ------ ------ ------ 
  00158  OK     00013  OK 
  00159  OK     00014  OK 
  0015A  OK     00015  OK 
  0015B  OK     00016  OK 
} 

All of the group, view, and pair information can also be listed individually. As an example, by pairs and then by storage 
group: 

C:\>symdm -sid 0129 -sg lcseb246_sg list -v -pairs_info -detail 
 
Symmetrix ID : 000197800129 
 
Storage Group       : lcseb246_sg 
Source Array        : 000195703184 
Target Array        : 000197800129 
 
Migration State     : CutoverReady 
Total Capacity (GB) : 200.0 
Done (%)            : N/A 
 
Device Pairs (4): OK 
{ 
  Source        Target 
  Dev    Status Dev    Status 
  ------ ------ ------ ------ 
  00158  OK     00013  OK 
  00159  OK     00014  OK 
  0015A  OK     00015  OK 
  0015B  OK     00016  OK 
} 

C:\>symdm -sid 0129 -sg lcseb246_sg list -v -detail -sg_info 
  
Symmetrix ID : 000197800129 
  
Storage Group       : lcseb246_sg 
Source Array        : 000195703184 
Target Array        : 000197800129 
  
Migration State     : CutoverReady 
Total Capacity (GB) : 200.0 
Done (%)            : N/A 
  
Source Configuration: OK 
{ 
  Storage Groups (1): OK 
  { 
    Name   : lcseb246_sg 
    Status : OK 
    { 
      Dev 

Summary of Contents for VMAX



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands