manualshive.com logo in svg

Dell EMC VMAX, Configuration And Best Practices Technical Notes

Share
Download
Dell EMC VMAX Configuration And Best Practices Technical Notes Download Page 16

16 

 

C:\>symdm environment -src_sid 3184 -tgt_sid 0129 -setup 
 
A DM 'Environment Setup' operation is in progress. Please wait... 
 
    Analyze Configuration..........................................Started. 
      Source SID:000195703184 
      Target SID:000197800129 
    Analyze Configuration..........................................Done. 
    Setup Configuration............................................Started. 
    Setup Configuration............................................Done. 
 
The DM 'Environment Setup' operation successfully executed. 

Once the setup is complete, the migration sessions can be created. 

Note: NDM Environment setup will create RDF links between the Source and Target arrays using one port per Director 
for each zoned link. However post Setup the user has the ability to add extra links manually using:  

 

 

   

symrdf modifygrp –rdfg 250 –add dir xx –remote_dir xx 

VALIDATE AND CREATE MIGRATION SESSIONS

 

Solutions Enabler examines a specific application’s storage on the source array and automatically provisions equivalent storage on the 
target array.  The target devices are assigned the identity of the source devices and are configured in pass-through mode which allows 
the data to be accessed through both the source and target devices.  

Prior to running the create operation, the target array resources can be validated to ensure that the target array has the resources 
required to configure the migration sessions: 

C:\>symdm create -src_sid 3184 -tgt_sid 0129 -sg lcseb246_sg -validate -nop 
 
A DM 'Validate Create' operation is 
in progress for storage group 'lcseb246_sg'. Please wait... 
 
    Analyze Configuration..........................................Validated. 
    Create Storage Group(s) on Target..............................Validated. 
    Duplicate Device(s) on Target..................................Validated. 
    Create Initiator Group(s) on Target............................Validated. 
    Create Port Group(s) on Target.................................Validated. 
    Create Masking View(s) on Target...............................Validated. 
 
The DM 'Validate Create' operation successfully executed for 
storage group 'lcseb246_sg'. 

The lcseb246_sg storage group and devices are configured properly and the create operation will succeed. 

If there are 

configuration issues that will prevent the create from completing, the validate, as in this example with another storage group, will fail 
and reference the SYMAPI logs for more information:

 

C:\>symdm create -src_sid 3184 -tgt_sid 0129 -sg lcseb246_TEST_sg -nop -validate 
  
A DM 'Validate Create' operation is 
in progress for storage group 'lcseb246_TEST_sg'. Please wait... 
 
An invalid DM configuration has been detected.  Operation not allowed. Check the symapi log file 

The log file shows the reason for the failure: 

06/09/2016 15:20:48.791    904   1320 EMC:SYMDM   emcValidateNDMDevice SG: lcseb246_TEST_sg 
SrcSymm: 000195703184 TgtSymm: 000197800129. 

Source device: 00164 is not valid for migration, 

status: 6002 (The specified device does not have the 'dynamic RDF1 OR RDF2 capable' attribute set)

 

Summary of Contents for VMAX



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands